|Electrical Connection||Screw Terminals|
|Contact Material||Silver or Gold|
|Setting range||-0.2 to 28 bar|
|Degree of enclosure||IP30, IP44 or IP55|
|Pressure range||0 - 1200 bar|
|Operating temperature||-40 to +125 Deg C|
|Outputs||CANopen SAE J1939|
|Wetted Material||Stainless Steel|
The extent of automation in both mobile and stationary applications is increasing dramatically. As the efficient management of machines and systems becomes more and more dependent on integral electronic controls, there will be an increasing demand for sensors and transmitters.
Danfoss has decades of experience in this development and has managed to follow the market needs both in relation to technologies and functions.
Features and benefits:
Today the Danfoss product program covers a broad selection of transmitter types which all combine the state of the art technologies with intelligent choice of material. This secures that we are able to tailor our range to almost any measuring task – at any budget.
|Operating Voltage||230 V|
|Mounting Type||Wall Mounted|
The Danfoss gas detecting sensor, DGS, is designed to help you comply with the environmental F-gas regulation and health and safety requirements.
Features and benefits:
The DGS can be mounted on new or existing systems in supermarkets, process refrigeration plants, refrigerated storage/ warehousing, or in other special applications or areas/zones.
|Voltage||24 V a.c. +/-20% 50/60 Hz, 15 VA or 24 V d.c. +/-20%, 10W|
EKE 347 is the new series liquid level controller to replace the EKC 347, and EKE 347 is used for regulation of the liquid level. The controller is connected with a level sensor that continuously measures the liquid level in the vessel/reservoir.
With the user friendly interface and remarkable network connectivity capabilities, EKE 347 liquid level controller upgrades the control to a new level.
The EKE 347 controller is used for regulation of the liquid level in:
Features and benefits:
The controller receives a 4-20mA signal from a guided radar sensor AKS4100(U) which accurately measures the liquid level in vessels/reservoirs. Advanced algorithms provide analogue or digital signals to modulate ICM motorized valves or solenoid valves respectively.
Danfoss offers a complete system for monitoring and optimizing any commercial refrigeration solution, such as for instance glass door merchandisers, air dryers, cold rooms, trucks and trailers.
In the wide range of Danfoss electronic controls you will find:
Danfoss offers a range of evaporator controls with thermostatic expansion valves or with electric expansion valves. The valves can be used for a variety of refrigerants and operating ranges suited for food retail applications.
The evaporator controls with thermostatic expansion valves are designed to ensure precise control of the injection of refrigerant liquid into the evaporators to ensure optimum performance and low energy consumption.
The evaporator controls from Danfoss have functions for regulating/monitoring temperature, defrosting, doors, rail heating, light and fan operation.
With remote communication as a part of ADAP-KOOL® refrigeration control system, evaporator controls comprise monitoring and control of display cases and cold rooms including alarm monitoring. The Danfoss electric expansion valves enable adaptive, automatic refrigeration control with no manual setting required. This provides additional energy savings.Introducing the next generation case control series: AK-CC55
Danfoss offers a solution that makes it easier than ever to save on adaptive and reliable food retail refrigeration. The new AK-CC55 case controls deliver energy savings of 6-10% compared to the next best alternative. It relies on acknowledged and advanced Danfoss adaptive super-heat algorithms to control refrigerated display cases and cold rooms.
The new ADAP-KOOL® Case Control generation ensures the system providing the same great value as always and now delivers a much better user experience, no matter if you’re an OEM, installer, service technician, or food retailer. For example, the large terminals on the AK-CC55 make it easy to loop the pressure transmitter cable from one controller to the next one.
|Color||Black & Green|
The new EKE 400 is specifically designed to control industrial refrigeration evaporators – in small as well as large systems.
Following the Distributed Control System (DCS) architecture, advanced control algorithms, and wizard for quick set-up and commissioning EKE 400 significantly reduces controls installation time and costs and provides operational safety and efficiency.
The EKE 400 evaporator controller manages the complete operation in cooling and defrost mode for optimal operation and defrost sequence (Ammonia, CO2, and HFC/HCFC based systems). It’s applicable for defrosting both flooded evaporators and DX evaporators* and supports multiple defrost methods, including hot gas defrost (pressure control/liquid drain), electrical defrost, and water/brine defrost.
An Easy-to-use Wizard enables quick set-up of key parameters and efficient commissioning, and the predefined process sequence ensures reliable operation and defrost. The EKE 400 is especially designed to get the best performance from Danfoss valves, however, it also works with non-Danfoss valves.
Features and benefits:Specifically, for industrial refrigeration:
EKE 400 includes MODBUS communication which allows integration to central PLC system. However, it can also be used without central PLC as standalone.
|Sensor Type||Industrial Position Sensors|
|Operating Temperature||-40 DegreeC to +85 DegreeC|
|IP Protection Level||IP67|
Danfoss is taking functional safety to the next level with a full program of state-of-the-art rotary position sensors, wire position sensors, and inclination sensors.
Variants of the sensor types are produced according to PL d (EN ISO 13849-1:2015), making the complete portfolio suitable for safety-critical applications.
|Model No||AKS 4100|
|Available lengths Cable||800-5000 mm|
|Available lengths Coaxial||500-2200 mm|
|Uses||can be used with all non-flammable refrigerants - including ammonia and CO2|
The AKS 4100 liquid level sensor takes you to a whole new level of flexibility and accuracy. With TDR guided radar technology, the sensor is fully adapted to industrial refrigeration – reliable and with high accuracy.
All sensors are easy to install and fully flexible. No on-site calibration is needed, and you can easily adjust the probe length on site.
|Model Name/Number||MBT 3310|
|Temperature range||- 50 Degree C to 800 Degree C|
|Sensing element||Pt 100 or Pt 1000|
|Process connection||AISI 316 / Brass|
MBT 3310 bearing sensor is specially designed for measuring the temperature in the bearings on wind turbines. Aimed at applications where reliability, longevity, and accuracy are crucial, the bearing sensor helps collect data to improve turbine performance and optimize predictive maintenance. MBT 3310 bearing temperature sensor is fitted with an adjustable spring-loaded protection tube that always ensures metallic contact between bearing and sensor. For monitoring of bearing temperatures where there is risk of overheating, in applications such as:
Adjustable spring-loaded protection tube
Sensor tube and pocket material: AISI 316 Ti
Temperature is playing a vital role in many industrial processes and therefore an accurate measurement is a must. Non-accurate temperatures can cause big fatal consequences such as reducing the lifetime of your equipment if overheated with just a few degrees.
The Danfoss range includes temperature sensors, and transmitters, and helps you make a difference on the bottom line.
Depending on the equipment, different element technologies can be applied, and if required the temperature sensor can be delivered with a transmitter to get an analogue output signal.
Special care has been put into the design of the sensor in relation to the reaction time. On top of this, the sensor construction ensures minimum radiation of heat, which results in a measurement very close to the actual temperature of the media.
|Voltage||24 V DC|
|Data communication||Modbus for AK-SM 850|
|Mains connection||120 V - 0.40 A - 50/60 Hz - 50 VA|
|Working range||102 - 132 V|
|Main fuse||max. 10 A|
|ED in 3 minutes||33% at 60 DegreeC|
|Ambient temperature||-10 to +60 DegreeC|
|Storage temperature||-25 to +85 DegreeC|
At low ambient temperatures it can be difficult to enable fast ignition of oil burners. As a solution we have created the EBI4, a series of high performance ignition units to increase ignition power in low temperatures.
The EBI4-series of ignition units fit a broad range of domestic burners and light commercial gas or oil burners and are setting new standards within modern ignition units for oil and gas burners, making them a very worthy successor of the very well-known Danfoss EBI series.
Complies with the RoHs and WEEE directives - EMC according to EN 55014-1 and EN 5514-2.
|Gross weight||0.04 kg|
|Net weight||0.03 kg|
|Further information||Dual 0-10V Output (2 AO)|
|Type designation||AK-OB 110|
|Comments||PIN C: CODE 8: HI - LOW:125BAR|
|Further information||Dual 0-10V Output (2 AO)|
|Packing format||Multi pack|
|Product group||I/O and communication modules|
|Product name||I/O module|
|Quantity per packing format||45 pc|
|Wireless M-bus frequency||868 MHz|
|Wireless M-bus interface||EN13757-4,Mode T1 and C1|
|Antenna (changeable)||External antenna (SMA)|
|Communication interface||Bluetooth 2.1 class 2 (10.0m)|
|Dimensions without antenna||159 x 77 x 33 mm|
|Integrated battery type||Lithium ion|
|Operation time||20 hours (approximately)|
SonoRead™ 868 is a portable Wireless M-Bus T1 and C1 transceiver (OMS) with Bluetooth interface. It reads all OMS standardized meters. Connecting the meter readings with the SonoApp™ Workspace via the SonoApp™ creates a powerful mobile radio meter reading system. This mobile radio meter reading system will administrate known and unknown meters and encryption keys.Features and benefits:
|Supply voltage||9 to 36 VDC|
|Operating temperature (ambient)||-40 DegreeC to 70 DegreeC (-40 DegreeF to 158 DegreeF)|
|Storage temperature||- 40 DegreeC to 85 DegreeC (- 40 DegreeF to 185 DegreeF)|
|Programming temperature||- 40 DegreeC to 70 DegreeC (- 40 DegreeF to 158 DegreeF)|
|IP rating (with mating connector attached)||IP 67|
|Weight||1.29 kg (2.85 lb)|
Designing smart, safe but simple systems is a real challenge on machines with multiple high-current applications, such as linear actuators, lamps and electric motors. Due to power limitations, a separate controller is typically required to drive each application.
The new Danfoss MC018 high-current controller gives Original Equipment Manufacturers (OEMs) enough power to drive several applications up to a total stable current of 120A with a single controller. Extra high-power pins can also drive a particularly demanding application without compromising the performance of others. This with noiseless motor control.
As always, safety is a top OEM – and user – priority. To meet this demand, the MC018 has a separate logic power supply for intelligent fault detection. This means the controller is still able to send diagnostic information to the master controller. Even in the event of a short circuit or burnt fuse.
The simplicity and cost of a machine control system depend on the number of components used. With the MC018, OEMs gain better performance with fewer high-current controllers. Together with full PLUS+1® compatibility a fast and easy integration in advanced control systems is ensured. This is speeding up the time to market.
|Model Name/Number||SonoCollect 110 & 111|
|M-Bus Interface||Up to 500 unit loads,auto-scan,compliant to EN 13757|
|Wireless M-Bus Interface||OMS Compliant,AES encryption,auto-scan,Mode: S,T,C|
|Ethernet interface||100 MB,RJ45,support of IPv6 and IPsec (VPN)|
|GSM interface||Optional,external antenna via SMA-Connector,slot for Mini-SIM|
|WAN connection to server system (push)||TCP/HTTP connection (XML)|
|Encryption WAN (server communication)||SSL (server- and client-side certification),OpenVPN|
|E-Mail transmission (push)||XML data|
|FTP transfer (push, pull)||CSV data|
|Memory for local data storage||More Than 2 GB|
|Firmware update||Directly or via WAN (Internet)|
|Configuration||Complete remote control via LAN or WAN (Internet)|
SonoCollect™ 110 / 111 is a smart metering data concentrator for energy meter reading. It comes with a standardized wired and wireless M-Bus interface supporting up to 500 meters. Extracted metering data is communicated to the Cloud or other analyzing tools via IP technology. The wireless M-Bus is offering a new technology compliant to OMS making it possible to capture energy- and consumption data via open communication standards and high security levels. This makes it useful in all present and prospective infrastructures.Features and benefits:
Danfoss offers a comprehensive program of controllers, actuators and sensors to control a wide range of functions in the supermarket, e.g. heating, ventilation, air conditioning and light.
The control of the many different components can be integrated in the Danfoss system manager for easy monitoring and operation.
The components can be configured for multiple functions in food retail, for instance: