Danfoss AC Drives

Product Details:

The VLT® Lift Drive is designed to provide reliable operation and excellent ride comfort for a minimum of 2.1 million cycles when running at an ambient temperature of below 45°C. Ideal for new projects or for retrofits, it operates without motor contractors and can be quickly and easily commissioned in less than 10 minutes.

Designed for all motors, including asynchronous, induction, permanent magnet, copper rotor and direct online PM motors, the VLT Lift Drive is suitable for both traction and hydraulic lifts in open- or closed-loop systems.

The compact design and intelligent cooling concept means it easily fits even into small installation spaces. And a range of built-in features eliminates the need for extra components. Scalable RFI filters minimize electromagnetic interference, integrated DC chokes suppress harmonics while ensuring the drives meet relevant EMC standards, and step-up, step-down transformers are not required.

Supply voltages and power range

• 380-400 V...4-55 kW

• Travel comfort is enhanced thanks to a range of noise-reducing features
• Energy savings can be achieved as cooling fans run only when absolutely necessary
• The drive is quick and easy to commission as it fits all common feedback systems and there are just 10 parameters to set
• The drive operates reliably in harsh conditions due to specially coated circuit boards
• Components remain firmly in place in environments with high degrees of vibration thanks to the ‘ruggedized’ version

Product Details:

With one of the best power/size ratios, VACON® NXP Liquid Cooled drives are ideal for applications where space is at a premium or air cooling is difficult. Heavy industries with harsh operating conditions, such as in marine, offshore and mining environments benefit from the drive’s compact design and robust reliability.

Liquid-cooled AC drives can be used in many combinations, from a single dedicated frequency converter to large-scale common DC bus systems. Packed with features, these fully standardized drives maximize the utilization of space while minimizing overall lifecycle costs.

As a high degree of protection (IP54 or higher) can easily be achieved with these drives, they can be installed almost anywhere in a plant or on a vessel. This eliminates the load on air-conditioning systems in electrical rooms reducing costs and installation time, and makes them ideal for retrofitting.

Servicing is fast and easy. Features such as safe torque off (STO) and safe stop 1 (SS1) improve safety, and conformal coated circuit boards enhance reliability.

NXA, NXN, NXB and NXI configurations:

• Active Front-end (NXA), Non-regenerative Front-end (NXN), Brake Chopper (NXB) and Inverter (NXI) configurations are available.
• For more information about these configurations please refer to the VACON® NXP Common DC Bus selection guide.

Power range:

• 3 x 400-500 V...132-4100 kW
• 3 x 525-690 V...110-5300 kW

• Floor space requirements and infrastructure needs are reduced as the compact design needs no air ducts
• Investment savings as no large air-conditioning systems are needed due to minimal dissipation of heat loss to the air
• Fulfills all relevant international standards and global requirements including marine, safety, EMC and harmonics approvals
• Virtually silent operation as large cooling fans are not needed

Product Details:

Built to last, this robust drive operates effectively and reliably even with the most demanding applications and in the most challenging environments.

VLT^® AutomationDrive takes full advantage of all that the new digital age has to offer to ensure it completely fulfills the requirements of your applications and optimizes your processes throughout the entire lifecycle.

Its cutting-edge thermal design and unique back-channel cooling make VLT^® AutomationDrive one of the most compact and cost-efficient drives in the market. And new intelligent maintenance features and a range of DrivePro^® services proactively improve productivity, performance and up time.

Supply voltages and power range:

• 3 x 200-240 V...0.25-37 kW
• 3 x 380-500 V...0.37 kW – 1.1 MW
• 3 x 525-600 V...0.75-75 kW
• 3 x 525-690 V...1.1 kW – 1.4 MW

Low harmonic drive:

• 3 x 380-480 V...132-450 kW

12-pulse drive:

• 3 x 380-500 V...250 kW – 1 MW
• 3 x 525-690 V...250 kW – 1.4 MW

• A wide operating temperature range of -25°C to +50°C without derating ensures reliable operation when your applications take your drive to the extremes
• The flexible, modular design concept provides an extraordinarily versatile motor control solution
• The new VLT^® Wireless Communication Panel LCP 103 communicates wirelessly with MyDrive^® Connect making it easier to perform commissioning, operation, monitoring and maintenance tasks
• Back-channel cooling concept reduces costs, energy consumption and the size of the cooling system
• New ‘ruggedized’ design reduces the potential negative effects of vibration
• The need for PLC capacity is reduced thanks to Smart Logic Control
• Low lifetime costs are ensured as the drive is highly resistant to wear and tear
• The lifetime of electronics is prolonged due to back-channel cooling for enclosures D, E and F
• Commissioning and upgrades are easy due to plug-in technology
• High-precision position and synchronization thanks to availability of Integrated Motion Controller throughout the entire product range
• Features such as intelligent heat management, Safe stop and Safe Torque Off ensure safe and energy-efficient operation of the drive
• VLT^® Motion Control Tool MCT 10 offers a customized commissioning experience

High-precision positioning and synchronization with reduced costs and system complexity

To optimize performance, many applications across all industry sectors have a need for precise positioning and synchronization. These applications include:

• Rotary tables 
• Packaging machines
• Labelling machines 
• Conveyors 
• Extruders
• Palletizers

To date, positioning and synchronization operations have been performed using servo drives. However, servo equipment is expensive; it is difficult to commission and requires additional cabling. And, as servo drives do not work with open loop control systems, there is a high failure rate. Many applications do not require the high dynamic performance offered by a servo drive. An alternative was to use an AC drive. But, until now, an additional internal or external module or an encoder on the motor was required.

Additional Information:

• Delivery Time: READY STOCK
• Packaging Details: TRANSPORT WORTHY

Product Details:

Designed for simplicity and robustness, the VLT® Decentral Drive FCD 302 is a user-friendly product with high performance and a strong protection degree.

A decentral-drive solution eliminates the need for space-consuming control cabinets. And, with the drives placed near the motor, there is no need for long-screened motor cables.

With the VLT Decentral Drive FCD 302, all the options are built into the unit reducing the number of boxes to be mounted, and the connections and terminations in the installation. As a result, labor costs and the risks of failure are dramatically reduced.

Supply voltages and power range:

• 3 x 380-480 V...0.37-3 kW

• Installation is flexible as the drive adapts to any brand of motor
• Servicing is fast and easy due to the pluggable twin-part design
• Cleaning is easy thanks to the drive’s smooth surface
• Cable savings are possible as a result of the integrated power and fieldbus looping terminals
• Direct connection to a PC is possible thanks to the integrated USB port
• The need for PLC capacity is reduced due to the built-in smart logic controller

Product Details:

The VLT® Refrigeration Drive FC 103 is designed to help significantly reduce the lifecycle costs of your refrigeration systems. It offers efficiency- and reliability-enhancing features, integrated process control functions and a commissioning environment specially designed to meet the needs of refrigeration applications. It also features a setup Wizard which uses common refrigeration terms. This makes installation and commissioning easy and safe for refrigeration technicians and installers.

The continuous variable speed control provided by the VLT Refrigeration Drive makes intelligent capacity control possible. By creating stability while balancing the capacity to the actual load, system-wide coefficient of performance improves providing significant energy savings in a wide range of applications.

The drive contains all modules necessary for compliance with EMC standards. The integrated, scalable RFI filter minimizes electromagnetic interference, and the integral DC link chokes reduce harmonic distortion in the mains network. As these features are built in to the drive in the factory, cabinet space can be reduced. Efficient EMC mitigation also enables the use of cables with small cross sections which reduces installation costs.

• 3 x 200-240 V...1.1-45 kW3 x 380-480 V...1.1-450 kW3 x 525-600 V...1.1-630 kW

• Energy consumption and maintenance requirements are reduced thanks to a range of pump features such as the pump cascade controller and flow compensation
• Optimum system efficiency is achieved by taking advantage of the drive’s software features
• Challenging environments are no problem due to the drive’s coated electronics
• The need for external cooling or oversizing is avoided as the drive operates efficiently in a maximum ambient temperature of 50°C without derating
• There are no EMC concerns as a result of integrated DC link harmonic and EMC filters

• PC toolsVLT® Motion Control Tool MCT 10
• VLT® Motion Control Tool MCT 31
• Danfoss ecoSmart
• Danfoss HCS (Harmonic Calculation Software)
• Danfoss Servo Sizer
• VLT® Energy Box

• 9000 - 90,00000/-

Additional Information:

• Item Code: FC103
• Pay Mode Terms: T/T (Bank Transfer),D/P,D/A

Product Details:

Get even higher reliability and lower total cost of ownership (TCO) in your heating, ventilation and air-conditioning (HVAC) installations, with this unique VSD optimized for building automation systems.

More than ever, the extreme climates, inaccessible machine rooms and isolated outposts of our planet need the best process control there is for their HVAC installations. Your everyday critical functions and costly systems need it too, as they face ever-increasing competition and efficiency demands. Always with high performance in mind, the enhanced VLT® HVAC Drive gives you more room to maneuver. It confronts the issues and gives you rock-solid reliability. With rock-bottom lifecycle costs too.

Endorsed by the World Alliance for Efficient Solutions as a Solar Impulse Efficient Solution.

The 1000 Efficient Solutions comprise the very best the world has to offer in clean and profitable solutions to protect the environment. VLT® HVAC Drive achieved the top score of 4.0, assessed on the criteria of viability, deployability, and sustainability.

Supply voltages and power range:

• 3 x 200-240 V...1.1-45 kW
• 3 x 380-480 V...1.1-1000 kW
• 3 x 525-600 V...1.1-90 kW
• 3 x 525-690 V...1.1-1400 kW

Low harmonic drive:

• 3 x 380-480 V to 160-710 kW

12-pulse drive:

• 3 x 380-500 V...315-1000 kW
• 3 x 525-690 V...450-1400 kW

• Slim down your TCO. Ongoing demands for lower TCO are challenges the VLT® HVAC Drive can help you meet.
• Install it outdoors in extreme climates. Searing heat and deep frost are all in a day’s work for the enhanced VLT® HVAC Drive. You get full reliability running this drive outdoors with temperature extremes from 50°C to minus 25°C.
• Save time. You can parameterize and troubleshoot the drive from outside the AHU, thanks to the remote LCP. Maximize uptime by reducing the shutdown, since there is no need to open up the AHU and lock it down again afterwards.
• Get the freedom to choose your favorite motor. Choose exactly the motor you prefer, for whatever reason from supply security to performance optimization. The enhanced VLT® HVAC Drive is not only optimized to control induction, permanent magnet and synchronous reluctance motor technologies; our development team is working all the time to include compatibility with upcoming motor technologies in future software updates as well.
• Get the freedom to communicate. The ability to integrate the AC drive easily into your building automation system is a key to optimal control. The VLT® HVAC Drive features a number of HVAC-specific communication protocols, such as BACnet/IP, that give you flexibility of installation in both new and existing building automation systems.

Additional Information:

• Item Code: FC102
• Delivery Time: 2 WEEKS
• Packaging Details: TRANSPORTWORTHY

Product Details:

The VLT® AQUA Drive is designed to provide the highest level of performance of AC-motor-driven water and wastewater applications. Featuring a wide range of powerful standard features, which can be expanded with performance-improving options, the drive is equally suited to both new and retrofit projects.

The considerable daily load variation in water or wastewater treatment plants makes it economically feasible to introduce motor control on rotating equipment such as pumps and blowers. The new generation VLT AQUA Drive can realistically offer first-year cost savings of between 10–30% compared to traditional drive solutions. Its high lifetime availability and low energy consumption and maintenance costs provide you with the lowest cost of ownership.

The quick and user-friendly setup of water and pump settings reduces installation time ensuring a fast route to maximum energy efficiency and motor control. By collecting the most important parameters in one place, the risk of incorrect configuration is reduced significantly.

• 1 x 200-240 V...1.1-22 kW1 x 380-480 V...7.5-37 kW3 x 200-240 V...0.25-45 kW3 x 380-480 V...0.37 kW – 1 MW 3 x 525-600 V...0.75-90 kW3 x 525-690 V...45 kW – 1.4 MW
• Low harmonic drive3 x 380-480 V...132-710 kW
• 12-pulse drive3 x 380-690...250-1400 kW

• Assets are protected thanks to specially designed software that prevents, for example, water hammering
• Energy efficiency is maximized as a result of the drives control algorithms and design which focus on reducing heat loss
• High energy savings related to air conditioning are ensured due to the unique back-channel-cooling concept that transfers 90% of heat away from the room
• Electromagnetic interference and harmonic distortion are reduced thanks to the built-in, scalable RFI filter and integrated DC link chokes
• Perfect system integration and adaptation to the application are possible due to freely programmable warnings and alerts
• 3–8% energy savings are achieved as a result of Automatic Energy Optimization

• Centrifugal pumps and blowers, positive displacement blowers.
• PC toolsVLT® Motion Control Tool MCT 10
• VLT® Motion Control Tool MCT 31
• Danfoss ecoSmart
• Danfoss HCS (Harmonic Calculation Software)
• Danfoss Servo Sizer
• VLT® Energy Box

• 9000 - 90,00000/-

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),D/P,D/A
• Delivery Time: 3 WEEKS
• Packaging Details: DANFOSS, VACON, YASKAWA, DELTA, FUJI, MITSUBISHI, SCHNEIDER, L&T, LS,LG, CG, KEB, KIRLOSKAR, ABB, SIEMENS, ROCKWELL, ALLEN BRADLEY,

Product Details:

The VLT® Lift Drive is designed to provide reliable operation and excellent ride comfort for a minimum of 2.1 million cycles when running at an ambient temperature of below 45°C. Ideal for new projects or for retrofits, it operates without motor contractors and can be quickly and easily commissioned in less than 10 minutes.

Designed for all motors, including asynchronous, induction, permanent magnet, copper rotor and direct online PM motors, the VLT Lift Drive is suitable for both traction and hydraulic lifts in open- or closed-loop systems.

The compact design and intelligent cooling concept means it easily fits even into small installation spaces. And a range of built-in features eliminates the need for extra components. Scalable RFI filters minimize electromagnetic interference, integrated DC chokes suppress harmonics while ensuring the drives meet relevant EMC standards, and step-up, step-down transformers are not required.

• 380-400 V...4-55 kW

• Travel comfort is enhanced thanks to a range of noise-reducing features
• Energy savings can be achieved as cooling fans run only when absolutely necessary
• The drive is quick and easy to commission as it fits all common feedback systems and there are just 10 parameters to set
• The drive operates reliably in harsh conditions due to specially coated circuit boards
• Components remain firmly in place in environments with high degrees of vibration thanks to the ‘ruggedized’ version

• Mid-range to high-rise residential and commercial building lifts, industrial site freight lifts, mine-shaft lifts, ‘recreational’ applications, such as ski lifts, boat lifts, aircraft lifts or elevators, vehicle lifts, walkways.
• PC toolsVLT® Motion Control Tool MCT 10
• VLT® Motion Control Tool MCT 31
• Danfoss HCS (Harmonic Calculation Software)
• Danfoss Servo Sizer
• VLT® Energy Box

• 9000 - 90,00000/-

Product Details:

For full flexibility in motor type, system design and energy efficiency, connect the standalone drive VLT® DriveMotor FCP 106 to your choice of induction motor or permanent magnet motor.

Installation of this low-voltage drive is simple due to the integrated cooling system and an individually adjustable motor adapter plate. Alternatively, mount the VLT® DriveMotor FCP 106 close to the motor using the wall mount adapter plate.

The need for cabinets and long motor cables are eliminated enabling you to save costs however your system design looks.

Built-in features for smooth and efficient pump, fan and conveyor operation make this drive easy to integrate and commission for these dedicated applications.

Supply voltages and power range:

• 3 x 380-480 V...0.55-7.5 kW

• Drive lifetime is extended and harmonic load on the mains is minimized thanks to the built-in DC choke which reduces THDi to less than 46%
• Connectivity is flexible thanks to the integrated FC Protocol, Modbus and BACnet or optional Profibus communication protocols
• The drive operates reliably in wet, dirty and corrosive environments due to the IP66/Type 4X Outdoor enclosure and PCB protection
• Energy is saved and drive lifetime is extended due to the sleep mode
• High overload capability supports applications with a high starting torque
• The VLT® Memory Module MCM 101 facilitates helpful implementation of factory settings for OEM and machine builders, speeds up commissioning and simplifies drive updates
• Installation and maintenance costs are reduced since external components, such as control and monitoring devices, are no longer required

Product Details:

Built to last, this robust drive operates effectively and reliably even with the most demanding applications and in the most challenging environments.

VLT® AutomationDrive takes full advantage of all that the new digital age has to offer to ensure it completely fulfills the requirements of your applications and optimizes your processes throughout the entire lifecycle.

Its cutting-edge thermal design and unique back-channel cooling make VLT® AutomationDrive one of the most compact and cost-efficient drives in the market. And new intelligent maintenance features and a range of DrivePro® services proactively improve productivity, performance and uptime.

• A wide operating temperature range of -25°C to +50°C without derating ensures reliable operation when your applications take your drive to the extremes
• The flexible, modular design concept provides an extraordinarily versatile motor control solution
• The new VLT® Wireless Communication Panel LCP 103 communicates wirelessly with MyDrive® Connect making it easier to perform commissioning, operation, monitoring and maintenance tasks
• Back-channel cooling concept reduces costs, energy consumption and the size of the cooling system
• New ‘ruggedized’ design reduces the potential negative effects of vibration
• The need for PLC capacity is reduced thanks to Smart Logic Control
• Low lifetime costs are ensured as the drive is highly resistant to wear and tear
• The lifetime of electronics is prolonged due to back-channel cooling for enclosures D, E and F
• Commissioning and upgrades are easy due to plug-in technology
• High-precision position and synchronization thanks to availability of Integrated Motion Controller throughout the entire product range
• Features such as intelligent heat management, Safe stop and Safe Torque Off ensure safe and energy-efficient operation of the drive
• VLT® Motion Control Tool MCT 10 offers a customized commissioning experience

Additional Information:

• Delivery Time: READY STOCK
• Packaging Details: TRANSPORT WORTHY

Product Details:

Product Details:

Product Details:

Low Harmonic Drive improves system efficiency and increases grid robustness to avoid downtime. It can compensate for individual drives or it can be installed as a compact standalone solution at a point of common coupling to compensate for several loads simultaneously.

The active filter ensures optimal harmonic suppression independent of the number of loads and their individual load profile. In addition, it corrects the power factor and balances the phase load to provide optimal energy utilization.

• 380-480 V...190-400 A

• The lifetime of electronics are prolonged thanks to innovative concepts such as back-channel cooling
• Durability and reliable operation is improved thanks to coated PCBs
• A high degree of customization is possible due to the wide range of options
• Running costs are low as a result of features such as sleep mode, progressive switching frequency and power factor correction
• Servicing is easy due to the modular design

• A range of applications for the water and wastewater, marine, oil and gas and mining industries.
• PC tools
• VLT® Motion Control Tool MCT 10
• VLT® Motion Control Tool MCT 31
• Danfoss HCS (Harmonic Calculation Software)
• Danfoss Servo Sizer
• VLT® Energy Box

• 9000 - 90,00000/-

Product Details:

Product Details:

The VLT® OneGearDrive® is a highly efficient, permanent magnet, three-phase synchronous motor coupled with an optimized bevel gear box which helps to optimize plant productivity and reduce energy costs.

With only one motor type and three available gear ratios, the motor concept covers all typical versions of conveyor drives commonly used in the food and beverage industry. The reduced range of physical configurations reduces costs and simplifies spare-part storage. Uniform mechanical dimensions reduce engineering and installation time and costs.

The drive comes in two versions: Standard for use in dry and wet production areas and Hygienic for use in wet areas and environments with high cleaning intensity including aseptic and cleanroom production areas.

• Up to 40% energy savings compared to conventional systems thanks to high system efficiency
• Less noise and no airborne germs and dirt particles drawn into motor and expelled back into the surrounding air due to fan-free operation
• Unrestricted use and high protection in wash-down areas thanks to high degrees of protection
• Easy to clean due to smooth enclosure design
• Fast, reliable connection and lower installation costs as a result of motor and brake connections via terminal box with CageClamp® technology
• Resistance to detergents and disinfectants thanks to aseptic coating

Product Details:

The VLT® Advanced Active Filter AAF 006 improves system efficiency and increases grid robustness to avoid downtime. It can compensate for individual drives or it can be installed as a compact standalone solution at a point of common coupling to compensate for several loads simultaneously.

The active filter ensures optimal harmonic suppression independent of the number of loads and their individual load profile. In addition, it corrects the power factor and balances the phase load to provide optimal energy utilization.

Additional voltage ranges and filter currents are available on request.

• The lifetime of electronics are prolonged thanks to innovative concepts such as back-channel cooling
• Durability and reliable operation is improved thanks to coated PCBs
• A high degree of customization is possible due to the wide range of options
• Running costs are low as a result of features such as sleep mode, progressive switching frequency and power factor correction
• Servicing is easy due to the modular design

Product Details:

Product Details:

Product Details:

Product Details:

Product Details:

Product Details:

The VLT® Micro Drive FC 51 is small and yet powerful and built to last. Panel space can be saved and installation costs reduced thanks to its compact size and minimal commissioning requirements.

Despite its compact size and easy commissioning, the VLT Micro Drive can be set up to perform perfectly even in complex applications. It is supported by guided programming of specific functions and the use of a PC software tool for parameterizing. And, thanks to its coated PCBs, the drive ensures reliable and cost-effective operation also in demanding environments.

• 1 x 200-240 V...0.18-2.2 kW3 x 200-240 V...0.25-3.7 kW3 x 380-480 V..0.37-22 kW

• Side-by-side mounting without derating is possible thanks to the compact, book-style design
• Penetration of dust is minimized thanks to coated PCBs
• Radio disturbance from motor cables is limited due to built-in RFI filters
• Lifetime of the drive is extended and reliability improved as a result of the effective heat sink that removes heat from the electronics
• Energy consumption can be reduced as kinetic energy in the application can be transformed into braking power to slow down the motor

• Conveyors, pumps, fans, mixers, extruders, palletizers, packaging machines and other industrial appliances.
• PC tools
• VLT® Motion Control Tool MCT 10
• VLT® Motion Control Tool MCT 31
• Danfoss ecoSmart
• Danfoss HCS (Harmonic Calculation Software)
• Danfoss Servo Sizer
• VLT® Energy Box

• 9000 - 90,00000/-

Additional Information:

• Item Code: FC051
• Pay Mode Terms: T/T (Bank Transfer),D/P,D/A,Other
• Delivery Time: READY STOCK
• Packaging Details: TRANSPORT WORTHY